Set the Record input source drop-down, in the Recording panel to CHANNEL 3 (AUX).Connect an RCA cable from a spare output on your mixer, usually labelled BOOTH, MASTER 2 or REC OUT, to the DECK3/AUX input on the Reloop Flux ensuring it’s SOURCE DECK PHONO/LINE dip switch is set to LINE.Connect the Reloop Flux inputs and outputs to DECK 1 & DECK 2, leaving the DECK3/AUX input spare, and a USB cable from the Flux to your PC, then launch Serato DJ Pro.In the example below, we suggest you use the DECK3/AUX input for this purpose, but you can use any of the three inputs on the Reloop Flux, that you aren't using to mix with. Serato DJ Pro interfaces like the Reloop Flux require a few more steps in order to record, as audio is mixed by the mixer your interface is connected to, so you'll need to return an audio output from that mixer, back into a spare channel input, on the interface. When you are finished recording your mix, name it (i.e."mixtape 1") by tying into the File name field and press the Save button.When you are ready, press the REC button in the Recording panel, and start your mix.Test that your record levels aren't clipping, by playing a loud section of your mix, then adjusting the Record input gain control - if required.Set the Record input source drop-down, in the Recording panel to Mix.Click the REC button in Serato DJ Pro, to open the Recording panel. ![]() Connect your Mixer with a USB cable to your PC, as you would normally, and launch Serato DJ Pro.To record with your Serato-compatible Mixer: Most Serato-compatible mixers & controller allow for easy recording in Serato DJ Pro. Recordings are saved as 24-bit by default. macOS: Mac>Users>USERNAMEHERE>Music>_Serato_>RecordingĪdditionally, Recorded files are automatically split when the recording exceeds 3 hours (16-bit) or 1 hour 50 minutes (24-bit). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |